Introduction to the characteristics of the evaporator
Release time:
2022-10-18
1, The inner diameter of the evaporator is φ200mm, and the height is about 100mm metal round basin.
2, the evaporator is metal round structure, the inner wall should be round and smooth, the edge of the evaporator shall not have the defect such as burr or bruise.
3, All the parts in contact with water should be smooth, and the welding seam of its mutual cooperation or connection part should be tight, firm, and there should be no water leakage.
4, evaporator parts, parts of the assembly should be correct, there shall be no loose, deformation and other defects affecting the use.
5, evaporator parts, parts of the protective layer should be firm, even, clean, there shall be no delamination, corrosion and other defects.
6, the evaporator and the installation frame should be installed conveniently, and can make the evaporator in normal use will not be disengaged because of the wind influence.
7, Accessories: a measuring cup with scale, a water reservoir, a mounting frame, a wire mesh cover (to prevent birds from drinking water, users can choose their own).
Hot news